New

I am new to Bonanzle.
In 1997 I started Booster Pump Technologies [ Pump Sales, Manufacturing and Consulting ].
Prior to that I was the outside Technical Consultant for Southern California Pump Sales.

This sale is for a 1 horsepower, 3 Phase, Goulds GB series = 18GB

Goulds Model # 18GBC10-15G0:
18: 18gpm BEP
GB: Pump model
C: cast iron suction and discharge housing
10: 1hp rating
1: 60Hz, 2 pole, 3500rpm
5: 3 phase, TEFC
G: 7 stages
0: standard mechanical seal

Please contact us and ask questions and or advise us of the intended use of the equipment There are many other models available:In the 18GB series, 3/4hp to 3hp and 5 stage to 15 stage with 1 phase and 3 phase motors, ODP and TEFC motors

Click here to ASK The Pump Tech a ?:

Or you can call us at 760-947-6457

For Sale is a NEW, with 1 year factory warranty, pump as follows.

Goulds High Pressure Booster Pump, GB Series. Goulds Model 18GBC10-15G0 - 7 stage - 1 HP, TEFC, 3phase, 60hz, NEC full load amps [ 230vac 3.6 ] [460vac 1.8 ]

APPLICATIONS:
Residential, commercial, agricultural or pressure wash
Booster service
Spray systems
Water circulation
General Purpose pumping

SPECIFICATIONS:
Pump This is a 18GB - 7 stage
RECOMMENDED RANGE 6 - 28 gpm
BEP 18gpm
Maximum suction (inlet) pressure: 75psi
Maximum Liquid Temperature: 160 degrees F
Maximum Flow: 28gpm
Pump run out: 34gpm
Minimum Flow: 6gpm
Pipe connections: 1" NPT inlet and outlet
Rotation: Clockwise when viewed from motor end
Maximum lift with foot valve: 10 ft, check NPSH curve
Mech Seal: Carbon Rotary, Ceramic Statioary, Buna Elastomers, 18-8SS metal Parts
Motor NEMA standard 56J frame
Totally enclosed fan cooled (TEFC)
1 horsepower, 60 Hz, 3500 rpm,
3 phase 208-230/460 vac
For 3 phase motors, overload protection and starter unit must be provided

WARNINGS
Do Not run pump dry
Do Not run pump below minimum flow
Do Not dead head pump. (pump running at no flow)
  At minimum a flow switch should be installed ( and maintained ) to de-energize pump
  at low and/or no flow
A check valve is required at the discharge of the pump to prevent flow reversal.
Maximum inlet (static) pressure for use with this pump is 75psi.

Suitable Liquids; Potable water or other clean non corrosive liquids.

As flow (gpm) increases pressure decreases. The boost is the pressure the pump will "add"
to the pressure coming into the pump.
This is what the 18GB can do ( approx):
10 gpm @ 210' ( 91 psi ) Boost
15 gpm @ 190' ( 82 psi ) "
18 gpm @ 170' ( 73 psi ) "
20 gpm @ 160' ( 69 psi ) " >>>>Maximum for landscape irrigation
25 gpm @ 118' ( 51 psi )

Example, you are pumping from a water reservoir tank (flooded suction) and your landscape
design (or other pumping need) is for 18gpm . With this pump you can provide 73psi (less
losses through inlet piping) at the pump discharge. Or if you have 25psi coming into the pump
(at 18gpm) this pump will add 73psi, for 98psi at the discharge of the pump.

For more information click on this link:
http://pumptech.homestead.com/Goulds18GB7Stage.html
You can call us at 760-947-6457

==Do not buy this pump== if you do not know what you are buying or how it will work in
your application. SEE "RETURNS" BELOW

==TERMS==
<>We do not export.
<>Payment is to be completed within 5 days of purchase.
<>We accept payments via PayPal (and possible other methods )
<>California residents, sales tax will be added.( 8.25%, we will pay any additional)
<>This pump needs to be "BUILT", the lead time can be 1 week or longer to ship
<>Signature delivery confirmation is required
<> Click Here for complete Terms and Conditions

= = = VERY IMPORTANT = = =

RETURNS: Please, know what you are buying. Ask us questions if something is not clear.

We are here for you before and after the sale.

If equipment is used it is NOT RETURNABLE.

Returns due to warranty issues are, of course, accepted. Instructions will come with the
pump on requirements for return of equipment. We recommend holding on to the box and packaging material for a little while if you can. If the equipment is installed and used correctly
and there is no failure in 30 days it is likely not going to fail. The manufacturers warranty is
for 1 year.

Non Warranty Returns
<>You have 7 days in which to return your purchase for any reason other
     than a warranty issue.
<>Refunds shall be a merchandise credit towards another ( presumably correct type and size )
     pump. RETURNED PUMPS ARE SUBJECT TO A 30% INSPECTION / RESTOCKING CHARGE.
<>In addition to the inspection and restocking charge, where free or flat rate shipping is provided,
     there will be a charge equal to the shipping charges we paid.
<>The equipment must be returned in new condition in original packaging with all documentation.
<>Shipping must be prepaid and is not refundable.
Customer must contact us prior to any return for instructions and Return Authorization (RA). <>If equipment is used it is NOT RETURNABLE.

Shipping:
Free and flate rate shipping, if offered, is to the lower 48 states only.
Shipping is standard ground only.
Pumps are shipped UPS or FedEx or Other, our choice, standard ground.
Signature delivery confirmation is required

Item is shipped F.O.B. shipping point.
Point of Title and Liability: All items are sold FOB shipping point.
Title to all items sold shall pass to Buyer upon delivery by Seller to carrier at shipping point.

Shipments to CA will have sales tax added. ( 8.25% / we will pay any additional )